Recent Posts

Archives

Topics

RC Modeler Must-Haves: 14 Essential Tools

The aged observant that “Anything is easy if we have a right tools” is quite loyal in modeling; a correct collection will facilitate any job. The hardware and collection here will assistance we with your subsequent project, either it’s a quick-assembly ARF or a finish scratch-build.

DREMEL STYLUS CORDLESS ROTARY TOOL

This Dremel apparatus offers a contour-grip pattern with a latest in lithium-ion battery technology. This apparatus feels roughly like an prolongation of your palm and allows accurate control. This is a apparatus that gets a examination on any plan we do, and it’s equally profitable in a seminar and as a field-box tool. With a extensive accumulation of materials it can cut, a Dremel Stylus is one of a many versatile collection around.

KS TUBING CUTTER BENDER

Whether your craft runs on gas or glow, we will need to cut and hook tubing for it. The KS Cutter can cut tubing of adult to a 5/8 in. hole yet crimping it. The easy-to-use bender works good on tubing of adult to a 3/16-inch hole and allows we to hook it yet crimping it.

DU-BRO E/Z THREADER

Tired of nursing your bruise fingers after you’ve threaded on all a clevises? Then this apparatus is usually what we need! It creates installing pivot round links, nylon clevises and cup-style round links discerning and easy.

GREAT PLANES EASY-TOUCH HAND SANDER CONTOUR MULTI-SANDER

Sanding is never fun, yet a Easy-Touch Contour Multi-Sander and Hand Sander make a pursuit many easier. We use 3 of any size, one for any grit: counterfeit (80), middle (150) and excellent (180 or 220).

MIDWEST PRODUCTS EASY MITER BOX

This miter box offers many facilities that make slicing balsa and other woods a elementary job. It can hoop element as far-reaching as 2 inches and as thick as 1/4 inch. It enables we to make loyal cuts as good as pointed cuts of 22.5, 30, 45 and 60 degrees. The best things about this miter box are a 3 cam clamps that reason a element resolutely in place while you’re cutting.

 

HANGAR 9 Z-BEND PLIERS

A Z-bend is substantially a easiest approach to make a plain tie on during slightest one finish of a pushrod (save a other finish of a pushrod for an tractable connector). These Z-Bend Pliers make this and many other jobs extremely easier.

 

DU-BRO KWIK-HINGE SLOTTER KIT

 

 

 

 

 

 

This slotting pack takes a con out of slicing or reopening hinge slots. Included in a pack is a core beam that fits any form of hinge and helps we grasp ideal fixing slots.

 

 

GREAT PLANES C.G. MACHINE

The many vicious approach to pledge a successful initial moody is to change your craft properly. For this vicious step, we rest on a Great Planes C.G. Machine for all yet a largest airplanes. This apparatus is easy to use and is many some-more arguable than balancing a craft by picking it adult by a wingtips.

 

GREAT PLANES PROP REAMER

 

 

 

 

 

 

 

 

 

 

This is an essential tool. It seems as yet whenever we use new props, a hole roughly always has to be enlarged. The usually certain and protected approach to do this is with a column reamer such as a one from Great Planes. Using a palm cavalcade or a cavalcade press means that we run a risk of off-centering a hole and digest a column useless. This will never occur with a column reamer.

HOBBICO BUILDER’S TRIANGLE SET

 

 

 

 

 

 

 

 

 

 

A precisely built craft will fly good and true. At some point, any ARF that we build will need a rudder to be squared adult with a stabilizer. This apparatus simplifies that task.

 

 

CHARGER RC BEVELING TOOL

 

 

 

 

 

 

 

If we like to build prosaic foamies, we will adore this tool. With one elementary lift opposite any control surface, it creates a clean, ideally beveled cut that is prepared for hinge tape.

 

GREAT PLANES DEAD CENTER ENGINE MOUNT HOLE LOCATER

This apparatus is usually a sheet for imprinting a accurate plcae of a ascent hole in an engine or engine mount, yet we also like to use it to symbol a locations of a servo-mounting holes and for other vicious hole placements.

 

MIDWEST PRODUCTS EASY CUTTER ULTIMATE

Sometimes, we modelers need usually a discerning trim on a hang of balsa, and one approach to do this is with a hobby knife. A many some-more accurate and cleaner process of slicing sticks of balsa, however, is to use a Midwest Easy Cutter Ultimate. Set a blockade on a knife during a angle of a cut, and make as many repeated cuts as we need.

 

DU-BRO TRU-SPIN PROP BALANCER

Balancing your column is an comprehensive necessity; it saves wear and rip on a craft and on a motor. One of a best ways to do it is with a Tru-spin column balancer. This apparatus can hoop props, spinners and rotor heads of any distance and formula in a accurate change any time.

 

 

Be Sociable, Share!

Leave a Reply

*